TABIHAUS® SYSTEM
WHAT DOES TABIHAUS® PROVIDE?
Support for architectural studios
Own computer programme for compliance with regulations and personalised calculation of transmittance and condensation. Work scheme and resolution of critical points.
In addition, in our "private area", you can download the CAD files of the construction solutions, the BIM implementation of the system, and certificates of the system and its components, and laboratory tests.
We have our own architecture and engineering departments to obtain the best solution for each project.
Support for the developer
With our programme, we know exactly the number of panels and the accessory to be used for each panel. No more budget deviations. We are ahead of the ZERO waste regulations on site.
Support for the construction company
Simple work diagrams, in terms of the layout and placement of our panels on site. Drastic reduction in the number of accessories to be used. Objective ZERO errors.
ADVANTAGES OF THE TABIHAUS® SYSTEM
Concept of the construction as an installation point
Not as a place of manufacture of the system. Controlled manufacturing process with the highest quality standards and process control, which provides perfect dimensional control in the product.
Extreme lightness
Advantages of lightness in construction. Resistance to seismic and structural movements. Resistance to loading, transport and unloading of industrialised systems. High speed of work execution. Absence of large cranes and scaffolding.
100% dry construction
Total elimination of water inside the building. Elimination of future risk of damp and mould. TABIHAUS® is manufactured with Epsom Salt, a natural desiccant. Impossibility of proliferation of bacterial life, as well as attack by mites, termites, rodents, etc.
CO2 footprint
Cold production process and low temperature drying. We avoid product fragility and help to reduce the CO2 footprint in the construction sector.
Extremely simple to install
No high qualification of the operators is required for a correct installation of the system. Screw in and seal with a sealant gun.
Very high thermal insulation
The TABIHAUS® panel consists of a highly insulating Epsom Salt board (K=0.18 W/mK), on an XPS (K=0.035 W/mK). The result is minimum transmittances in minimum thicknesses. Gain in useful square metres of living space.
Acoustic insulation
The system provides a Rs,w = - 22 dB, helping mineral wool systems to achieve very high acoustic reductions, exceeding the maximum requirements of the building regulations.
Refractoriness of 4 hours
Excellent thermal behaviour, stress and thermal shock resistance.
Very strong
Combines lightness with very high resistance to bending and compressive stresses. Excellent behaviour against impacts from hard and soft bodies, scratches.
Bracing of the structure. TABIHAUS® is the diaphragm of the building.
Very high load-bearing capacity
Allows the installation of metal ventilated façade systems, as well as the subsequent installation of gutters, aerials, air-conditioning equipment, etc.
Water vapour permeable
Impermeable to water and air, but highly permeable to water vapour. TABIHAUS® is living comfort.
TABIHAUS® PANEL TYPES
WHICH TABIHAUS® PANEL IS MOST SUITABLE?
SINGLE-SIDED PANEL BOARD
Salt board: 8 mm.
XPS: from 14 mm, increasing from mm to mm, up to 120 mm. Made to measure, millimetre by millimetre.
Nomenclature: examples: TABIHAUS® panel 8+14, 8+26, 8+34, etc.
Suitable for: Façades, and floors on concrete slabs, slabs and decks where it will be installed on a continuous surface (wood, concrete, XPS lost slab, etc).
Weight: approximately 7 Kg/m^2.
DOUBLE-SIDED PANEL BOARD
Salt board: 8 mm.
XPS: from 14 mm, increasing from mm to mm, up to 120 mm. Made to measure, millimetre by millimetre.
Nomenclature: examples: TABIHAUS® panel 8+23 +8, 8+33+8, 8+43+8, etc.
Suitable for: Slabs and decks with supports on beams or purlins.
Weight: approximately 14 Kg/m^2.
SELF-SUPPORTING TONGUE AND GROOVE PANEL TABIHAUS® PF
Salt board: 8 mm.
XPS: 50 mm.
Nomenclature: TABIHAUS® PF panel.
Suitable for: Façade as a self-supporting panel. Slabs and roofs supported on beams or purlins.
Weight: approximately 15 Kg/m^2.
TABIHAUS® IS VERY EASY TO INSTALL
Always with the application of our TABIHAUS® polymer, and with front screwing.
Chemical bonding
A thin but continuous cord is applied to the support where the panel is to be installed (chemical bonding). With this we achieve a gluing and sealing in the building.
Screwing
The screws (mechanical gluing) depend on the type of support to which our panels will be fixed:
Metal profiles <1.2 mm thick
Pltr trumpet head screw. For example, plasterboard or Steel Frame.
Metal profiles >1.2 mm thick
TABATX wing screw, countersunk head. For use in Steel Frame or hot rolled steel.
Wooden profiles
Wooden screws, countersunk head. Suitable for wooden structures.
Direct walls made of bricks and precast concrete blocks
Fischer SXLR countersunk head screw. Use for installation on brick or concrete.
External Thermal Insulation Composite System INDECO
We will use the AIS08080 plug. For example, on walls made of bricks and precast concrete blocks.
WHAT TOOLS DO I NEED?
SIMPLY, COMMON CONSTRUCTION TOOLS
Cutter, circular saw with guide, screwdriver with clutch, 600 ml silicone gun, etc. For more efficient work, we recommend the use of an electric or pneumatic 600 ml gun.
ELECTRIC / PNEUMATIC GUN 600 ml
SCREWDRIVER WITH DEPTH STOP
CIRCULAR SAW WITH GUIDE AND SUCTION
DO YOU WANT TO KNOW MORE ABOUT US?
At ANDARAGÓN, we have been manufacturing panels for the construction industry for more than 30 years, mainly in aluminium, steel and PVC. We were looking for a new material that would allow us to meet the requirements of the Euro building codes.
The study began by assessing the pros and cons of other panels used in the sector.
Fire resistance, impermeability to water but permeability to water vapour, valid for any type of structure and any type of finish, lightness, etc.
After a lot of work, with rights and wrongs we arrived at Epsom Salt, and a 100% recycled XPS.
Address
Andaragón, Las Norias Industrial Estate,
19-A, 50450
MUEL (Zaragoza - Spain)